by admin

Step by step debugging firmware on the Aliexpress / EBay STM32 boards

May 9, 2016 in ARM, C, C++, Hardware, Linux, Microcontroller, Programming, STM32, Tips & Tricks, Tutorial by admin

arm_cortex_logoIn some previous topics (here and here) I wrote about some cheap development boards which can be acquired from EBay or Aliexpress. Since System Workbench for STM32 is freely available for a while now, let’s see how can we use it to generate a project, compile it, upload it to a board and debugging it step by step. We’ll use for this the board I got from EBay, but it works the same with the any STM32 other board I have and also with some self-made ones.

For being able to install firmware on the board and debug it, first we need to have a hardware part which will sit between the computer and the board. There are various models and versions of these jtag debugers and they can be ordered online or found pretty cheap on ebay (clones). Another way to get hold of one of these is to have a development board which comes equiped with JTAG adapters, like the STM32 discovery series of boards. Some of these JTAG debuggers allow even breaking apart the JTAG debugger from the development board itself (LPCXpresso series, the nucleo boards).
Regardless of which JTAG interface is used, it should be one which is known to work with OpenOCD, as we’ll use OpenOCD for debugging. In our case we’ll use the stm32f4 discovery board’s stlink2 side. However, Before using it as a JTAG debugger, we need to disconnect the STLink part from the discovery board, by removing two jumpers. Once that is done, the STLink itself won’t be connected to the discovery board and it’s SWD header can be connected to any other board. Read the rest of this entry →

by admin

Small and cheap STM32F103 boards from aliexpress

May 3, 2016 in ARM, Hardware, Microcontroller, STM32, Tips & Tricks by admin

arm_cortex_logoRecently I was looking for some cheap boards which would allow me to play with the STM32F103 microcontroller and I’ve found that Aliexpress has couple of versions of them sold quite cheap by various sellers, with a very affordable price tag. There are various incarnations of these boards, and with difference in the price range, so I went with these two in the end:

Read the rest of this entry →

by admin

STMicroelectronics Attracts Linux Users to Free Embedded Development on STM32 Microcontrollers

February 11, 2016 in ARM, Hardware, Linux, Microcontroller, News, Programming, STM32 by admin

armvia st.com press release:

STMicroelectronics, a global semiconductor leader serving customers across the spectrum of electronics applications, has extended opportunities to design free of charge with its popular STM32 microcontrollers for Linux system users including professional engineers, academics, and hobbyists.

Most Linux distributions are free, and open-source application software makes the Linux world attractive to technology enthusiasts. Until now, however, most development tools for embedded computing have been available only for Windows® PCs.

The STM32CubeMX configurator and initialization tool and the System Workbench® for STM32, an Integrated Development Environment (IDE) created by Ac6 Tools, supported by the openSTM32.org community, and available at www.st.com/sw4stm32, are now both available to run on Linux OS.

ST’s latest move means Linux users can now start their own embedded projects on STM32 devices, free of charge, without leaving their favorite desktop environment.

“The Linux community is known to attract creative free-thinkers who are adept at sharing ideas and solving challenges efficiently,” said Laurent Desseignes, Microcontroller Ecosystem Marketing Manager, Microcontroller Division, STMicroelectronics. “We are now making it ultra-easy for them to apply their skills to create imaginative new products, leveraging the features and performance of our STM32 family.”

ST’s commitment means users can now benefit from free software for configuring microcontrollers and developing and debugging code, together with manufacturer-supported low-cost evaluation boards, allowing greater focus on product development. Tools installation is very easy and fast, which contrasts with established practice in the Linux world, where users often have to create or adapt their own tools with minimal support.

“Since the launch of the System Workbench for STM32 in early 2015, its popularity has grown both on Windows and Linux platforms,” said Bernard Dautrevaux, Ac6 Tools Chief Technical Officer. “ST’s new tools for Linux both validate and complement our work and the openSTM32 initiative, and we plan to further support ST with major upgrades to System Workbench for STM32 in the future, including the support of OS/X as a development host.”

For the original article and more details, follow this link.

by admin

Using cheap STM32 eval board with TFT LCD module from ebay

October 29, 2013 in Hardware, Microcontroller, STM32, Tips & Tricks, Tutorial by admin

stm32_board2There are a lot of sellers on ebay selling cheaply 320×240 LCDs with touch screen together with a microcontroller board. Usually the development board contains a  STM32F103 microcontroller (sometimes different) with or without some additional hardware. As an exemplification one of such sold configuration is:

  • 3.2″ TFT LCD Module, 320 * 240 pixels resolution, 26m colors.
  • Resistive touch screen, with XPT2046 Controller.
  • 4-6 leds
  • Twobuttons connected to GPIO lines
  • Serial communication interface
  • 2 mini-type USB socket, USB to RS232 and USB Device
  • 1 Micro SD card connector
  • A JTAG / SWD debug interface (20pin)
  • RTC battery
  • USB Power Supply

This web page not only has some information about how these boards could be used, but also provide some sample code using the LCD and a downloadable virtual image, containing:

  • Ubuntu desktop
  • ARM toolchain (gcc + newlib)
  • Eclipse C++ IDE
  • stm32loader.py – for loading code into the board
  • openocd – for loading code and debugging
  • Example FreeRTOS project with all source code, include LCD+touch drivers and a simple menuing system to get you started quickly

Isn’t that awesome?

For the original article and the link for downloading the virtual image, follow this link.

 
Skip to toolbar